Biomass power plant with boiler structures and steam stacks at dusk

Energy Service Company · Thailand · Est. 2015

Combustion engineering for biomass and waste-to-energy power plants

German combustion technology, Thai execution. We inspect, engineer, modify, commission and operate power plants so owners cut fuel and maintenance cost and keep the plant running.

20+
Plant projects
10+ yrs
Combustion experience
4 – 34 MW
Plant capacity range
4
Countries served

Who we are

An ESCO built by combustion specialists

Suvarnabhumi Global Co., Ltd. was established in November 2015 by a team with long experience alongside a leading German combustion technology company. Over ten years of practice and more than twenty biomass and waste-to-energy references stand behind our work.

As an Energy Service Company we take responsibility for the whole chain — energy consumption inspection, engineering, procurement, project management, installation supervision, and measurement and verification to prove the savings. We supply spare parts, maintain machinery and modify existing systems so clients cut production cost, reduce downtime and raise plant profitability.

Registration No.
0115558022514
Operation date
19 November 2015
Registered capital
THB 20 million
Head office
Bangkaew, Bangplee, Samutprakarn
Engineer inspecting an industrial boiler combustion chamber

Our service

One-stop energy efficiency management

From feasibility to daily operation, every discipline needed to keep a thermal power plant efficient and available.

01

ESCO Performance Guaranteed

Energy efficiency management delivered as one-stop service, with savings proven by Measurement & Verification (M&V).

02

Project Management Consultancy

Owner's engineer and project advisory: planning, scheduling, co-ordination, procurement assistance and inspection.

03

Independent / Lender Engineer

Independent technical review and due diligence for lenders and investors across power generation assets.

04

Construction & Commissioning

Machinery installation, tank and structure fabrication, piping, insulation, electrical cabling and full plant commissioning.

05

Operation & Maintenance

O&M service and operator training that maximise plant output while minimising maintenance cost and downtime.

06

Plant Monitoring System (PMS)

System analysis, system engineering, SCADA programming and installation — plus genuine spare part supply.

Specialisation

Boiler and furnace, end to end

Design, engineering, supply, erection and commissioning of complete boiler islands and their auxiliaries.

Design & EngineeringConsultancyModification & Up-gradationManufacturingErection & CommissioningSupply of all boiler accessories

Accessories & auxiliaries

  • All boiler pressure parts
  • Steam drum / water drum & internals
  • Furnace
  • Super heater tube & header
  • Economizer & tube
  • Attemperator header
  • Air pre-heater plate & tube
  • Single / multi / trim cyclone dust collector
  • Wet scrubber, bag filter & ESP
  • Fans with drives
  • Structure, ducting & hopper
  • Buck stay support for furnace tube
  • Fuel handling system
  • Ash handling system
  • Soot blowers of various types
  • Instrumentation
  • MCC, electrical cable & starter
  • Valves, fittings, flanges & hardware
  • Gear box & motors
  • Feed water, transfer & turbo pumps
  • PRDS & PRV
  • Steam & exhaust piping and supports
  • Steam distribution header & separator
  • Refractory & insulation
  • LP & HP chemical dosing system

Consultancy

  • Study of expansion & modernisation schemes
  • Capacity improvement proposals
  • Thermal efficiency increase with minimum spillover of old machinery
  • Cogeneration and low power consumption systems

Project management

  • Planning and scheduling
  • Co-ordination and monitoring
  • Procurement assistance & inspection
  • Site supervision and testing

Boiler upgradation

  • Upgrade existing boiler performance
  • Correlate field data with calculation
  • Turnkey assignments undertaken

Project references

Plants we have engineered, fixed and run

Selected works across Thailand, Sri Lanka, Fiji and Cambodia — several delivered in joint venture with Lawi Engineering.

Where we have worked

Project reference Commissioning record
Ajinomoto biomass plant boiler house and fuel conveyorPrimary air duct and step grate hydraulic modificationEngineer tuning grate drive on the rice husk fired boiler

2018 – 2020

Biomass Power Plant 4 MW

Ajinomoto Co. (Thailand) Ltd.

Ayutthaya, Thailand · Rice husk

Primary air duct modification, step grate guide support and hydraulic roller, new damper actuators, master load control program, combustion fire tuning.

Boiler water wall tube repair during plant renovationRe-programmed DCS screen showing steam drum and water drum controlRenovated biomass power plant running at night

2018

Biomass Power Plant 9.9 MW

Kamphaengphet Green Energy

Kamphaeng Phet, Thailand · Biomass

Full plant renovation: inspection and analysis, DCS re-programming and remote DCS panel, deaerator and wet ash modification, refractory repair, O&M and training.

EtaPlant RDF boiler island with steam pipingErection of the EtaComb 450 combustion systemWaste-to-energy plant boiler house during commissioning

2017

WTE Power Plant 9.4 MW — EtaPlant®

Better World Green Public Co., Ltd.

Saraburi, Thailand · RDF

Basic engineering and consultancy, supply and installation of EtaComb® 450 combustion system, steam boiler, feed water and ash handling. 45 MWth, 50 t/h at 53 bar(a) / 450 °C.

Commissioning team overhauling boiler equipment in Sri LankaAir pre-heater exchanger installationNew insulated ducting and exchanger sections ready for fitting

2017

Biomass Power Plant 8 MW

Tokyo Eastern Cement Company Ltd.

Sri Lanka · Biomass

Consultant engineer, commissioning and operator training, ID fan maintenance, APH exchanger installation and refractory repair.

Refractory repair crew inside the combustion chamberScaffolding and refractory casting inside the furnaceHydraulic power pack service during the campaign

2018

Biomass Power Plant 12 MW

Fiji Biomass Power Plant

Fiji · Biomass

Combustion chamber refractory repair campaign.

EtaPlant 17 MW biomass power plant siteBoiler feed water and deaerator equipment inside the plantMungcharoen Biomass plant entrance

2012

Biomass Power Plant 17 MW — EtaPlant®

Mungcharoen Biomass Co., Ltd.

Surin, Thailand · Eucalyptus bark, wood chip, rice husk

Overall power plant basic engineering with supply and installation of EtaComb® 600 combustion system. 67 t/h at 66 bar(a) / 485 °C.

200 ton fuel pendulum chute installed at the bagasse plantFabrication of the fuel pendulum chute in the workshopOverhauled safety and control valves ready for refitting

2016 – 2017

Biomass Power Plant 9.9 MW

Ban Rai Bio Power Plant

Uthai Thani, Thailand · Bagasse

Condenser re-tubing, 200-ton fuel pendulum chute fabrication and installation, safety/control valve and hydraulic piston overhaul, multi-cyclone modification.

3D plant design model of the twin-line RDF energy plantReference RDF plant structure and boiler islandBoiler steel structure erection on site

In development

RDF Power Plant 2 × 17 MW — EtaPlant®

Phnom Penh Green City

Phnom Penh, Cambodia · RDF

Site survey, engineering and plant design for a twin-line RDF energy plant.

Commissioning record

CapacityClientLocationYear
9.9 MWWell Korat Energy Co., Ltd.Buriram, Thailand2015
9.9 MWKPN Green Energy Solution Co., Ltd.Pichit, Thailand2015
6 MWTokyo Cement Company (Sri Lanka) Ltd.Mahiyangana, Sri Lanka2014
9.9 MWAdvanced Energy Development Co., Ltd.Nong Khai, Thailand2013
9.9 MWKamalasai Biopower 2010 Co., Ltd.Kalasin, Thailand2013
9.9 MWChangraek Biopower Co., Ltd.Nakhon Si Thammarat, Thailand2013
7.5 MWSahagreen Forest Co., Ltd.Kamphaeng Phet, Thailand2012
9.9 MWSrisangdaw Biopower Co., Ltd.Roi Et, Thailand2012
9.9 MWClean Energy Thapsakae Co., Ltd.Prachuap Khiri Khan, Thailand2011
7.5 MWDecha Bio Green Co., Ltd.Suphan Buri, Thailand2009
9.9 MWTokyo Cement Company (Lanka) Ltd.Trincomalee, Sri Lanka2008
9.9 MWKaona Power Supply Co., Ltd.Ubon Ratchathani, Thailand2008

Next generation energy

G-H2O™ — power generation made of water

A world-patented, completely self-sustaining hydrogen power generation system. Water and electricity circulate through a hydrogen production unit, storage tank, fuel cell and battery — 24 hours a day, 365 days a year, with only a small amount of water consumed.

Unlike conventional hydrogen generators, G-H2O™ never needs an external hydrogen refill. It does not depend on weather or on commercial power, can be installed almost anywhere with no installation work, and scales from a single household to installations above 1 MW.

G-H2O container-sized hydrogen power generation unit
G-H2O system conceptual diagram: electrolysis, hydrogen storage tank, fuel cell, battery and inverter

Mechanism — self-sustaining circulation

  1. 01Water from the supply tank feeds the water-electrolysis hydrogen production unit.
  2. 02Hydrogen is stored in the hydrogen storage tank — no external refill is ever required.
  3. 03The fuel cell unit converts hydrogen and oxygen back into electricity and water.
  4. 04Electricity is buffered in the storage battery unit and delivered through the inverter.
  5. 05Water returns to the tank, closing a self-sustaining loop of water and electricity.
Internal layout of the G-H2O unit: hydrogen production unit, water tank, fuel cell, battery and inverter

Tap water availability

The hydrogen generator includes a purified water system and can run on tap water or rainwater.

No commercial power required

A completely self-sustaining cycle of water and electricity — no grid connection needed to operate.

Stable 24-hour supply

Output is unaffected by sunlight or wind intensity, delivering steady power around the clock.

Space saving

Requires dramatically less footprint than equivalent solar or wind generation.

High safety

Only low concentrations of hydrogen are generated at any time, keeping the system inherently safe.

Household to utility scale

Scales from small residential units up to installations of 1 MW and above.

Chart comparing G-H2O output 100 percent for 24 hours a day against solar power at 16 percent over 8 hours
G-H2O unit lifted by a forklift at the factoryG-H2O container unit transported on a trailerSite preparation works for a G-H2O installationRemote area with a natural water stream suitable for G-H2O

Unparalleled cost performance

Solar generation is limited to about 8 hours a day; G-H2O™ is unaffected by weather and runs at 100 % output 24 hours a day — 7 to 8 times more energy per day, at a far lower capital cost.

Portable and quick to install

G-H2O™ 100 is a world-standard container size, so cranes, forklifts and trailers handle it. Given a solid foundation and a nearby tap or well, the system is running within a few days including piping and wiring.

Remote monitoring 24/7

Owners see generation, consumption, stored electricity and hydrogen level in real time from PC or smartphone, while our System Management Center monitors every unit and responds immediately to faults.

Ozone as a useful by-product

Splitting water also produces ozone, a proven strong steriliser. Routed through air-conditioning ducts it can sanitise malls, hospitals, hotels, airports, trains and restaurants while the unit generates power.

Resistant to disasters

Because it needs only a little water and battery power, G-H2O™ works in emergency situations and in regions without infrastructure — from disaster zones to remote areas of Mongolia and Africa.

Global adoption

A total of 100 MW of G-H2O™ has been adopted across Thailand, Malaysia and Australia, with new overseas factories and corporations being established to meet decarbonisation demand.

Product range — 2 kW to 50 MW

ModelApplicable scalePower generationHydrogen storageElectricity stored
G-H2O™ 200Hospitals & public facilities200 kW270 Nm³350 kWeh
G-H2O™ 100Small hospitals & facilities100 kW130 Nm³170 kWeh
G-H2O™ 50Convenience stores & shops50 kW50 Nm³70 kWeh
G-H2O™ 20Small stores20 kW25 Nm³35 kWeh
G-H2O™ 10Large residential & offices10 kW12 Nm³17 kWeh
G-H2O™ 5General residential5 kW5 Nm³7 kWeh
G-H2O™ 2Small residential2 kW2 Nm³3 kWeh

Main specifications

G-H2O™ series20010050
Model No.GH2O-200GH2O-100GH2O-050
Power generation capacity200 kW/h100 kW/h50 kW/h
Amount of electricity stored350 kWeh170 kWeh70 kWeh
Hydrogen storage capacity270 Nm³130 Nm³50 Nm³
Water supply tank2,800 L1,400 L600 L
Dimensions L × W × H (mm)6,058 × 2,438 × 2,5913,029 × 2,438 × 2,5913,029 × 2,438 × 1,295
Dry weight5,740 kg2,870 kg1,148 kg
Weight filled with water / hydrogen8,810 kg4,400 kg1,798 kg
Minimum installation space L × W × H (mm)8,058 × 4,438 × 3,5915,029 × 4,438 × 3,5915,029 × 4,438 × 2,295

Power generation method: circulating hydrogen energy generation (patented). Smaller models GH2O-020 to GH2O-002 range from 20 kW to 2 kW with 300 L to 30 L water tanks.

Contact

Talk to our engineers

Tell us about your plant, its fuel and the problem you are facing. We will come back with an engineering answer, not a brochure.

Office
Suvarnabhumi Global Co., Ltd.
115/102 Moo 12, Bangkaew, Bangplee,
Samutprakarn 10540, Thailand